10 mm Rubber Rolls — 1.20 m Wide
Order 10 mm rubber flooring rolls manufactured by Sport Floor in Egypt for international distribution and project supply. Our Egyptian product is 1.20 m wide, with custom lengths and plain black or speckled black finishes.
Send your quantity, finish, requested lengths and destination for an export quotation. Our references include 10 mm black rolls with yellow flecks exported to Uruguay in 2026.
10 mm Rubber Flooring Roll Specifications
These specifications apply to our Egyptian-manufactured 10 mm product. Lengths, finish and quantity are confirmed before order approval. Product and packed shipment weights are confirmed when arranging transport.
| Specification | Product Details |
|---|---|
| Product | 10 mm rubber flooring roll |
| Thickness | 10 mm / 1 cm |
| Width | 1.20 m |
| Length | Custom lengths, confirmed according to the order |
| Finish | Plain black or speckled black, with fleck colour confirmed |
| Manufacturing Origin | Egypt for the product described in this table |
| Coverage Calculation | 1.20 × roll length in metres = area in m² |
| Roll and Shipment Weight | Confirmed according to product reference, length, quantity and packing |
| Minimum Order | No minimum purchase quantity |
| Indicative Production Time | Approximately one week to ten days, depending on quantity. The schedule is confirmed after reviewing the order. |
| Manufacturing Warranty | One year against manufacturing defects, under agreed terms |
To compare other thicknesses, explore our rubber roll range. If your project is considering both rolls and tiles, review our rubber flooring options .
Selecting 10 mm Rolls for Each Project Zone
We review the 10 mm product against equipment, activities, loads and substrate conditions. Describing the intended use helps establish the product and installation requirements for each area.
Equipment Areas
Provide equipment types, weights, support points and site dimensions so the roll specification, substrate and fixing requirements can be reviewed.
Training Spaces
Specify activities, usage frequency and movable equipment, together with the required finish and zone layout.
Weights and Impacts
State loads, drop heights and impact frequency. Additional protection or thicker tiles may be required after assessment.
For zones requiring a tile-based solution, compare 20 mm rubber tiles and 30 mm rubber tiles . Suitability must be assessed against the application and loads, rather than thickness alone.
Plain Black and Speckled 10 mm Rubber Rolls
Specify the finish when requesting pricing. To extend an existing floor, provide a sample or visual reference for colour and surface appearance.
Plain Black
A uniform appearance for training spaces. Include the 10 mm thickness, quantity and requested lengths in your enquiry.
Explore Plain Black Rubber RollsSpeckled Black
A black base with coloured flecks. Our export references include 10 mm black rolls with yellow flecks supplied to Uruguay.
Fleck colour and appearance are confirmed before manufacture.
Explore Speckled Rubber RollsCalculate Coverage for Your 10 mm Roll Order
Our Egyptian product is 1.20 m wide. Multiply the width by the agreed length to calculate coverage. The examples below illustrate the calculation and are not fixed standard lengths.
| Roll Width | Example Length | Coverage per Roll |
|---|---|---|
| 1.20 m | 5 m | 6 m² |
| 1.20 m | 10 m | 12 m² |
| 1.20 m | 15 m | 18 m² |
Plan Lengths Around the Installation Layout
Total floor area alone does not determine the final order. Sheet direction, cuts around columns and entrances, and room dimensions affect roll lengths and quantities.
Send dimensions for each zone or a project plan before confirming the order.
Before Ordering
- State the length and width of each area.
- Mark columns and entrances.
- Specify the finish for each zone.
- Provide the installation direction if defined.
- Describe site access and handling restrictions.
10 mm Rubber Rolls Exported to Uruguay
In 2026, Sport Floor exported 10 mm black rubber rolls with yellow flecks to Uruguay, within an order that also included green, grey and black 20 mm rubber tiles.
For your international order, we confirm roll specifications, quantity, manufacturing origin, packing and shipping terms in the quotation. Manufacturing and transit schedules are stated separately.
| Destination | Product | Finish | Year |
|---|---|---|---|
| Uruguay | 10 mm rubber rolls | Black with yellow flecks | 2026 |
Request a 10 mm Roll Export Offer
- Quantity in square metres.
- Finish and required fleck colour.
- Requested lengths.
- Destination country and city or port.
- Documentation and packing requirements.
- Arrival date and requested delivery terms.
Manufacturing and Order Preparation
After quantity, finish and lengths are confirmed, we advise the manufacturing schedule. The indicative period is approximately one week to ten days and may vary with order volume.
For orders containing several finishes or lengths, state quantities by reference so the quotation, packing and delivery plan can be prepared.
Explore Our Manufacturing and Quality
10 mm Rubber Roll Prices and Export Costs
Prices depend on quantity, finish and requested lengths. Ask for a quotation identifying the product and the agreed supply services.
Product Price
Specify the area, finish and roll lengths. Compare offers using equivalent thickness, width and product specifications.
Packing and Handling
Provide receiving and storage restrictions. Product weights, packed weights and shipment dimensions are confirmed for your order.
Freight and Destination
Send the destination country and city or port. The offer identifies the shipping services and costs included.
Installation Planning for Your Overseas Project
Arrange installation with your local installer and confirm product requirements before work begins. Substrate condition, flatness, moisture and fixing method must be reviewed.
Substrate Preparation and Fixing
Rubber rolls should not be expected to correct defects in an uneven supporting floor. Confirm any preparation work before installation.
Where adhesive fixing is specified, check the suitability of the polyurethane binder or adhesive for the roll and substrate.
Joints and Handling
Roll flooring includes joints between sheets. Plan their positions, edge treatment and transitions before ordering.
Confirm that the chosen lengths can be transported, stored and handled within the receiving site.
Compare 10 mm Rolls with Thinner Options
If the project requires assessment of a lower thickness or different finished floor height, review these alternatives against the intended use and equipment loads.
8 mm Rubber Rolls
Compare the specification when evaluating a thinner alternative to 10 mm rolls.
View 8 mm Rubber Rolls6 mm Rubber Rolls
Review this option according to equipment, substrate condition and fixing requirements.
View 6 mm Rubber Rolls4 mm Rubber Rolls
A thinner option to assess against the application and supporting surface.
View 4 mm Rubber RollsFor projects combining sheets and tiles, explore our rubber tiles and specify the needs of each zone before allocating quantities.
Samples Before Finish Approval
Samples are available for official projects. For an international request, provide the required 10 mm reference and delivery address so dispatch arrangements and any charges can be confirmed.
Private clients can inspect samples at our office. Contact and visit information is available on our quotation page .
One-Year Manufacturing Warranty
A one-year warranty against manufacturing defects is offered. Conditions applicable to your export order are detailed in the quotation and contract.
Our installation services are provided in Egypt. Request the installation and care instructions for the selected product before arranging overseas work.
10 mm Rubber Roll Buying Questions
Is a 10 mm roll the same thickness as a 1 cm roll?
Yes. 10 mm equals 1 cm. Include the thickness, finish and required lengths in your quotation request.
What is the width of the Egyptian product?
The width is 1.20 m. Roll lengths are specified according to the order.
How much area does one roll cover?
Multiply 1.20 by the length in metres. For example, a 10 m length covers 12 m² before cutting. This is a calculation example, not a fixed standard length.
Which finishes are available?
Plain black and speckled black. Fleck colour and appearance are confirmed when the order is approved.
How can I get the price of 10 mm rubber rolls?
Send the quantity, finish, lengths and destination. We prepare a quotation identifying the product and included supply services.
Is there a minimum order quantity?
No minimum purchase quantity is required. Freight costs should be assessed against the order volume and destination.
Are 10 mm rolls suitable for heavy weight drops?
Loads, drop heights, impact frequency and substrate conditions need to be assessed. Thickness alone does not confirm suitability, and additional protection or another solution may be required.
Does the installed floor have joints?
Yes. There are joints between sheets. Their positions and edge treatment are planned as part of the installation.
Can the rolls be installed without adhesive?
The fixing method depends on the product, area, use and substrate. Confirm the method before installation.
How much does a 10 mm rubber roll weigh?
Weight is confirmed according to the product and roll length. Request actual product weight and packed shipment weight before arranging freight.
Can the rolls be used outdoors?
Outdoor suitability is reviewed for the selected reference and its exposure to sunlight, water, temperatures and site drainage conditions.
What acoustic or fire ratings apply?
Ratings must be checked against documentation for the exact product and, where relevant, the complete flooring system. No rating is established by thickness alone.
How long does manufacturing take?
The indicative period is approximately one week to ten days, depending on quantity and specifications. The schedule is confirmed after reviewing the order. Transport and customs clearance require additional time.
Have you exported 10 mm rubber rolls before?
Yes. In 2026, Sport Floor exported 10 mm black rubber rolls with yellow flecks to Uruguay.
How should the flooring be maintained?
Remove dust regularly and use cleaning products compatible with the selected flooring. Request care instructions before using strong chemicals or specialised cleaning equipment.
What warranty applies to export orders?
A one-year warranty against manufacturing defects is offered. Applicable conditions are stated in the quotation and contract.
Do you install flooring outside Egypt?
Our installation services are provided in Egypt. For overseas projects, arrange installation locally and confirm the product and substrate requirements before work begins.
Request Your 10 mm Rubber Roll Export Quote
Send your quantity, finish, destination and intended use. We will confirm the lengths, specifications, price and manufacturing schedule.
Email:
cairo@sportfloor-m.com
Learn about
Sport Floor
or compare our
rubber roll thicknesses
before finalising your order.