The binder wets compatible rubber particles during controlled mixing.
Sport Floor manufactures and supplies polyurethane binder for EPDM and SBR rubber granule systems used in wet-pour rubber flooring, playground surfaces, running-track resilient layers and compatible sports-flooring applications.
PU binder is not simply an adhesive applied to a floor. In its main rubber-granule application, the binder is mixed with compatible EPDM or SBR granules to create a bonded, resilient matrix that is then spread, levelled and compacted as part of the specified flooring system.
Sport Floor uses German raw materials within applicable PU binder formulations as a key material-quality advantage, supporting controlled production, repeat formulation and consistent supply for contractors, distributors, importers and international sports- flooring projects.
The correct binder depends on granule type, layer position, UV exposure, color requirement, temperature, humidity, system build-up and project application . For this reason, Sport Floor separates general binder selection from dedicated Aromatic and Aliphatic product pages.
The binder converts loose rubber particles into a connected resilient layer that can function inside a complete sports- flooring system.
The binder wets compatible rubber particles during controlled mixing.
The cured polyurethane matrix holds the rubber granules together.
Viscosity and working behavior influence mixing, spreading and compaction.
The binder should support the intended resilient behavior of the rubber layer.
Many single-component PU binders cure through reaction with ambient moisture.
The rubber layer must work correctly with the rest of the sports flooring build-up.
Visible colored EPDM surfaces can require different binder selection from buried black SBR layers.
Temperature and humidity influence working and curing behavior.
Several polyurethane products may appear in one sports-flooring system, but they perform different technical functions.
| Product | Main Function | Typical Use | Do Not Confuse It With |
|---|---|---|---|
| PU Binder | Binds EPDM or SBR rubber granules into a resilient matrix. | Wet pour, resilient rubber base layers, compatible track systems. | Primer or tile adhesive. |
| PU Primer | Prepares a compatible substrate and supports bonding between system layers. | Concrete, asphalt or specified receiving surfaces. | Granule binder. |
| PU Tile Adhesive | Bonds a prefabricated rubber tile or mat to the substrate where the system requires glue-down installation. | Rubber tile projects. | Granule-mixing binder. |
| PU Pore Sealer | Closes pores in compatible rubberized base construction before upper PU layers. | Selected PU sports systems. | Primer or binder. |
| Self-Leveling PU | Forms a continuous polyurethane layer. | Indoor and selected sports-floor systems. | Rubber-granule binder. |
| PU Topcoat | Creates the final protective and performance finish. | Selected PU sports flooring. | Binder for SBR or EPDM granules. |
Neither binder is automatically “better”. The correct choice depends on layer position, color, exposure and project specification.
Aromatic binder is commonly selected for compatible rubber granule layers where UV color preservation is not the primary requirement.
Aliphatic binder is considered where exposed colored rubber surfaces require stronger resistance to UV-related yellowing or color shift.
| Project Requirement | Binder Route to Review | Why |
|---|---|---|
| SBR Base Layer | Aromatic PU Binder | Common route where the rubber layer is black, buried or covered. |
| Running-Track Resilient Base | Aromatic PU Binder | Often used to bind SBR within selected Sandwich or Spray Coat systems. |
| Colored EPDM Top Layer | Aromatic or Aliphatic depending on specification | Color and UV requirements determine the appropriate route. |
| Premium UV-Sensitive EPDM Finish | Aliphatic PU Binder | Consider where color retention and reduced yellowing are critical. |
| Indoor Rubber Layer | Project-specific | UV may be less important, but chemistry and system compatibility still matter. |
| Rubber Tile Adhesion | Dedicated PU Adhesive if specified | Do not automatically substitute granule binder for tile adhesive. |
| Unknown System | Technical review required | Start from application, granules, thickness, exposure and complete build-up. |
A PU binder should be evaluated as a formulated technical material, not as an anonymous clear liquid sold by kilogram.
Sport Floor uses German raw materials within applicable PU binder formulations as part of its polyurethane sports-flooring manufacturing approach.
The quality of the material platform can influence production consistency in areas such as viscosity, processing behavior, granule wetting, curing response and batch repeatability .
For contractors working over hundreds or thousands of square metres, repeatability matters because unexpected changes in binder behavior can influence mixing, working time and installed layer consistency.
The binder should still be purchased by exact product specification, current TDS, current SDS and application requirement . German raw-material origin does not replace technical data.
Sport Floor also distinguishes clearly between German raw-material origin and finished-product manufacturing origin . These are separate facts and the supplied product origin is confirmed in the commercial offer.
Supports repeat production across contractor and export orders.
Relevant to mixing and coating compatible rubber particles.
Site conditions and product formulation both influence cure.
Important for phased projects and distributor supply.
The same binder-selection logic should not be applied blindly to every rubber layer.
SBR granules are widely used in black resilient base layers where economic thickness and elasticity are required.
EPDM is commonly selected for colored exposed top layers in wet- pour and decorative rubber systems.
Particle size affects surface area, workability and binder consumption.
Different granule shapes and gradations can change how binder coats the rubber.
Material density influences project quantity calculations.
Binder chemistry becomes more important when the layer is exposed and colored.
Binder quantity is connected to the volume of rubber being installed.
Do not copy a competitor's binder ratio into another product.
Wet pour is one of the most important commercial applications for polyurethane rubber-granule binder.
A typical wet-pour project may use a resilient base layer built with SBR granules + compatible PU binder , followed by a colored wearing layer using EPDM granules + the specified binder .
The exact layer thickness, rubber granule size, binder ratio and surface construction depend on system design, intended use, required impact performance and project specification .
For exposed colored EPDM layers, the binder chemistry should be selected with UV exposure and color stability in mind.
For buried SBR base layers, Aromatic PU Binder is commonly a more commercial route where the system specification permits it.
Sport Floor can supply binder only, SBR + binder, EPDM + binder or wider wet-pour material packages according to the BOQ.
Creates the resilient lower rubber layer.
Creates the colored exposed wearing surface.
Granules should be coated evenly according to current product instructions.
The mixed rubber layer is spread, levelled and compacted to the specified construction.
Binder use changes according to the running-track system. It should not be presented as identical across every track build-up.
Compatible PU binder can bind SBR granules in the resilient base beneath the sprayed wearing layer.
The binder can form part of the PU-bound SBR layer beneath the sealed and coated upper construction.
Full PU tracks use a different polyurethane build-up and should not be reduced to an SBR + binder system.
Binder selection should follow the actual tartan / synthetic track construction.
Confirm SBR type, granule size and selected layer construction.
Quantity planning should follow area, thickness, rubber density and current binder ratio.
Temperature and humidity affect workability and curing.
Binder can be supplied with granules and additional PU track materials.
There is no responsible universal kg/m² figure for every EPDM or SBR system.
The starting point for project material planning.
Thicker layers require more rubber and therefore more binder.
Granule type can affect density and binder requirement.
Smaller particles can present greater total surface area.
System density changes total rubber quantity per square metre.
Use the actual binder-to-rubber ratio for the supplied product.
Project planning should account for practical mixing and application loss.
Base-layer and wearing-layer consumption should be calculated separately.
Temperature can change how easily the binder flows and mixes.
Many one-component polyurethane binders react with atmospheric moisture.
High site temperatures can shorten practical working time.
Lower temperatures can change viscosity and curing speed.
External applications should not be exposed to uncontrolled rain during sensitive curing stages.
Only mix quantities that can be placed within the practical working period.
Follow current storage requirements and keep packaging properly sealed.
Site limits and cure guidance should come from the current Sport Floor product documentation.
Serious procurement requires more than a product photo and price per kilogram.
Aromatic or Aliphatic, one-component or other defined chemistry.
Color and physical form should be identified.
Relevant to mixing and wetting the rubber granules.
Useful for logistics and project quantity planning.
Use the exact current recommendation for the selected application.
Must be considered together with site temperature and humidity.
Review practical curing requirements before opening the area.
Use the current safety data sheet for handling, storage and PPE.
The commercial advantage is stronger when the binder is matched to the granules and surrounding system materials.
Aromatic or Aliphatic according to system requirements.
For compatible wearing layers and decorative wet-pour systems.
For resilient base layers and selected track systems.
For compatible substrate and layer preparation.
For selected rubberized PU system build-ups.
For compatible polyurethane sports-flooring constructions.
Matt, anti-slip or gloss systems according to project.
For finishing selected sports surfaces.
Sport Floor's value is not only the drum itself. It is the ability to connect the binder to the rubber, the system, the BOQ and the final sports-flooring application.
Binder sits within a wider polyurethane sports-flooring material range.
Buyers can source compatible rubber materials with the binder.
Material selection is connected to actual sports-flooring build-ups.
Area, thickness and system can be converted into a commercial material requirement.
Professional buyers can request current technical documents.
Supply can be planned by drum, pallet and project shipment.
Installers can source the binder or wider system packages.
Specifications can be reviewed around the application rather than one isolated material.
Professional quotations should define both technical product and commercial delivery conditions.
| Commercial Item | What to Confirm | Why It Matters |
|---|---|---|
| Binder Type | Aromatic or Aliphatic exact model. | Determines application and commercial category. |
| Required Quantity | Total kg / drums / tons. | Required for production and logistics planning. |
| Packing | Exact drum or container size for supplied product. | Do not assume a universal package weight. |
| Pallet Configuration | Drums per pallet where applicable. | Relevant to warehouse and shipment planning. |
| Documents | TDS, SDS, packing list and project-required submittals. | Required by professional contractors and importers. |
| Batch | Production/batch traceability where provided. | Useful for large or phased projects. |
| Storage | Current storage requirement and shelf life. | Important for importers and distant projects. |
| Incoterm | EXW, FOB, CIF or agreed delivery route. | Required for meaningful international price comparison. |
| Destination | Country, port, city or delivery point. | Required for transport planning. |
| Combined Order | Binder + EPDM + SBR + PU materials. | Can simplify project procurement. |
| Buyer Check | What to Request | Why It Matters |
|---|---|---|
| Exact Binder Type | Aromatic / Aliphatic and exact model. | Avoids buying the wrong chemistry for exposed colored surfaces. |
| Granule Compatibility | SBR, EPDM and specified granule size. | Binder must match the intended rubber system. |
| Current TDS | Issued technical data sheet. | Provides actual ratio and application information. |
| Current SDS | Safety data sheet. | Required for correct handling, shipping and site controls. |
| Viscosity | Product-specific test value / range. | Relevant to mixing and coating behavior. |
| Binder Ratio | Manufacturer recommendation for exact use. | Generic internet ratios can be incorrect. |
| Raw Material Platform | Declared formulation/raw-material information where available. | Useful when comparing material quality. |
| Application Support | Wet pour, track or sports-flooring system guidance. | Binder performs inside a complete system. |
| Complete System Supply | EPDM, SBR and additional PU materials. | Can reduce compatibility and procurement complexity. |
| Packing | Exact net weight and pallet configuration. | Required for landed-cost calculations. |
| Manufacturing Origin | Actual country of finished-product production. | Keep it separate from raw-material origin. |
| Export Terms | EXW / FOB / CIF and destination. | Required for fair price comparison. |
Wet pour, playground, running track, rubber layer or another system.
State the granule material and available size.
Required for project quantity planning.
State each base and wearing-layer thickness separately.
UV and color requirements can change binder selection.
Important when choosing Aromatic vs Aliphatic binder.
List the documents required for technical approval.
Required for international commercial supply.
PU binder is a polyurethane material used to bind compatible rubber granules such as SBR or EPDM into a connected resilient matrix for wet-pour flooring, running-track layers and other rubber sports-surface systems.
Not necessarily. Granule binder is designed to mix with rubber particles, while a PU adhesive may be formulated to bond prefabricated rubber tiles or mats to a substrate. Always use the product intended for the exact application.
Yes. Compatible aromatic PU binder is commonly used with SBR granules in resilient base layers, wet-pour systems and selected running-track constructions.
Yes, where the binder is compatible with the selected EPDM and system. Binder type should be selected according to exposure, color and project requirements.
Aromatic PU Binder is commonly used for SBR and other compatible rubber-granule layers where premium UV color stability is not the primary requirement.
Aliphatic PU Binder is considered where exposed colored EPDM surfaces require stronger resistance to UV-related yellowing or color shift.
Neither is universally better. Aromatic binder is often the more commercial route for buried SBR and protected layers, while Aliphatic binder is more relevant to exposed premium colored surfaces where color stability matters.
Potentially yes where the system permits it, but visible colored EPDM surfaces should be reviewed carefully for UV and color requirements.
PU Binder refers to polyurethane binder. Epoxy products are a different chemistry and should not be described as interchangeable with polyurethane binder.
Many rubber-granule binders are single-component moisture-curing polyurethane products, but the exact chemistry should be confirmed from the current technical data sheet.
Many one-component PU binders cure through reaction with ambient moisture. Exact curing behavior depends on the supplied product, temperature and humidity.
Use the current Sport Floor TDS for the exact binder and rubber system. Do not copy a generic ratio from another manufacturer.
Use the current technical recommendation for the exact binder, EPDM granule size, layer and application. EPDM ratios should not be assumed from SBR data.
Binder consumption depends on layer thickness, rubber density, granule size, binder ratio and system. Calculate the rubber quantity first, then apply the current binder-to-rubber ratio.
Smaller particles can present more total surface area and can therefore influence binder requirement and workability. The exact effect depends on gradation and system.
Yes. PU binder is commonly used to bind SBR and EPDM granules in compatible wet-pour playground and rubber-flooring systems.
Yes. PU binder is commonly used in compatible SBR resilient layers within selected Spray Coat, Sandwich and related synthetic track systems.
Full PU track systems use a different polyurethane construction. Do not assume that an SBR-granule binder plays the same role in every Full PU system.
Only where the exact product is formulated or approved for that use. Granule binder should not automatically be substituted for a dedicated rubber-tile adhesive.
Yes. Sport Floor uses German raw materials within applicable PU Binder formulations as part of its polyurethane sports-flooring manufacturing approach.
Not necessarily. German raw-material origin and finished-product manufacturing origin are separate facts. The actual product origin is confirmed according to the supplied binder.
Yes. Temperature can influence viscosity, workability and curing speed. Follow the current product application guidance.
Yes for moisture-curing polyurethane binders. Relative humidity can influence the curing reaction and practical working conditions.
Fresh polyurethane rubber systems should be protected from uncontrolled rain and site moisture during sensitive application and curing stages. Follow the current technical data sheet.
Professional buyers should request the current TDS, SDS, product identity, packing information and any project-required technical submittals.
Depending on the product, the TDS may include binder type, appearance, viscosity, density, application ratio, working conditions, curing guidance, packaging, storage and shelf-life information.
Follow the current storage instructions for the exact product. Keep containers correctly sealed and protected from inappropriate temperature and moisture exposure.
Yes. Sport Floor can review combined supply of PU Binder and compatible EPDM granules according to the selected wet-pour or sports-flooring system.
Yes. Contractors and project buyers can request SBR granules and the appropriate PU Binder as part of one material package.
Yes. Depending on the project, Sport Floor can supply binder, granules, primers, rubberized PU base materials, pore sealers, self-leveling PU, top coats and related sports-flooring materials.
Yes. PU Binder can be supplied to contractors, importers, distributors and project buyers internationally according to the selected product, quantity, packing and destination.
Commercial orders can be reviewed by total kg, drum quantity, pallet quantity or larger project/export requirement according to the selected binder and available packing.
Send the application, SBR or EPDM type, granule size, total area, layer thickness, indoor or outdoor exposure, binder type if specified, required quantity, technical documents and destination.
Send Sport Floor the application, granule type, granule size, layer thickness, total area, Aromatic or Aliphatic requirement, site exposure, required documentation, quantity and destination. We can quote PU Binder alone or build a wider package including EPDM, SBR and the additional polyurethane materials required by the selected system.