Smooth Surface Formation
Flow and levelling help create a continuous PU layer over the compatible base beneath.
Sport Floor self-leveling PU · seamless sports surfaces · manufacturer direct
PU Self-Leveling Compound for Seamless Sports Flooring Systems
Sport Floor manufactures PU Self-Leveling Compound for compatible polyurethane sports-flooring systems where a smooth, continuous and uniform PU layer is required before the final protective or functional finish.
In a sports floor, “self-leveling” should not be confused with a cementitious floor leveller used to correct structural slab levels. This product belongs inside a polyurethane sports-flooring build-up: it flows and settles to create a smooth PU layer over the compatible substrate or resilient layer beneath it.
Sport Floor manufactures its PU materials using German raw materials within the applicable formulations and supplies the self-leveling compound directly to sports-flooring contractors, distributors, importers and international project buyers.
Sport Floor ManufacturedPart of the Sport Floor polyurethane sports-flooring product family.
German Raw MaterialsGerman raw materials are used within the applicable formulation.
Seamless PU LayerDesigned to create a continuous smooth layer in compatible sports-flooring systems.
Direct Global SupplyAvailable to contractors, distributors, importers and project buyers.
What is PU Self-Leveling Compound?
A flowable polyurethane layer that creates a smooth, continuous sports-flooring surface
PU Self-Leveling Compound is a flowable polyurethane material used inside compatible seamless sports-flooring systems. Once applied over the approved layer beneath, it spreads and settles to form a smooth and uniform PU surface ready to receive the specified protective or functional top coat.
The material is especially important where the upper sports surface needs to be continuous, even and free from the open texture of the cushion or rubberized layer below. It helps create the dense body of the system that carries the final coating and markings.
Sport Floor treats self-leveling PU as part of a complete system rather than as a generic floor-levelling product. Primer, cushion or base layer, self-leveling compound, top coat and line marking should be selected together according to the sport, substrate and project environment.
Forms a smooth polyurethane layer inside compatible sports-flooring systems.
Creates a seamless base for top coats and sports markings.
Helps cover the texture of compatible elastic or rubberized layers beneath.
Can be specified in indoor and other compatible PU sports-flooring build-ups.
Manufactured using German raw materials within the applicable formulation.
Available individually or as part of a complete Sport Floor PU package.
Why self-leveling PU matters
Surface quality is created before the top coat is applied
Seamless Construction
The material forms part of a joint-free liquid-applied sports-flooring build-up.
Upper-Layer Support
Provides the dense, smooth layer needed before compatible functional or decorative top coats.
Uniform Appearance
Helps reduce the influence of the texture of the resilient layer below on the finished top surface.
Flexible System Role
Can work within cushioned and other compatible polyurethane systems where a flowable PU layer is specified.
Wear-Layer Foundation
Creates the support layer for the final top coat, friction profile and sports line marking.
Application on prepared systems
The compound should flow over the correct layer — not correct the wrong substrate
The self-leveling compound should be installed only after the substrate and the layers beneath it have been correctly selected and prepared. Depending on the system, it may be applied over an elastic cushion layer, rubberized layer, sealed base or another approved intermediate material.
It should not be used as a substitute for repairing weak concrete, correcting major civil-level defects or solving moisture problems. Those issues belong to substrate preparation, primer selection and project engineering before the self-leveling PU stage.
Once the underlying layer is ready, the compound is mixed and applied according to current Sport Floor technical data so it can flow, de-air and form the required continuous PU layer.
Self-leveling depends on correct preparation
Mixing, application thickness, de-aeration and cure conditions should follow the current Sport Floor TDS and selected system.
System position
From primer and cushion to self-leveling PU, top coat and court lines
In a typical compatible indoor PU sports-flooring system, the prepared concrete receives the correct primer. A resilient cushion layer may then be installed if the system requires shock absorption. PU Self-Leveling Compound is applied above the compatible lower layer to create the smooth dense body of the sports floor.
The final functional top coat is then selected for the required finish, slip characteristics and project environment, followed by the sports line marking.
This layered approach is why Sport Floor manufactures the self-leveling compound together with the primers, cushion products, sealers, top coats and marking materials around it.
Typical applications
Self-leveling PU for seamless sports halls, courts and training surfaces
Indoor Basketball Courts
Creates the dense seamless layer within compatible polyurethane basketball-floor systems.
Volleyball Courts
Suitable for compatible seamless PU systems requiring a smooth layer before the final functional finish.
Handball Courts
Used within compatible indoor sports floors designed for dynamic multidirectional movement.
Multi-Purpose Halls
Supports smooth, joint-free floors serving multiple sports and school or club activities.
Fitness & Training Areas
Useful in compatible seamless PU systems where a smooth resilient surface is required.
Spike-Resistant Systems
Where the selected system and current Sport Floor product data allow it, self-leveling PU may form part of higher-mechanical-load athletic flooring build-ups.
German raw-material advantage
Flow, levelling and long-term performance built on German raw materials
A self-leveling PU layer must flow during application and then become a durable part of the sports-flooring structure after cure. The formulation behind that transition matters.
German Raw Materials
Sport Floor uses German raw materials within the applicable PU Self-Leveling Compound formulation.
Complete PU Manufacturing
The product belongs to a broader Sport Floor range covering primers, cushions, pore sealers, top coats, adhesives and markings.
Manufacturer + Installer + Exporter
Sport Floor manufactures PU sports-flooring materials, uses them in its own project activity and supplies them directly for international orders.
Sports-floor PU vs cementitious leveller
Two products with similar names — completely different jobs
| Selection point | PU Self-Leveling Compound | Cementitious Self-Leveling Underlayment |
|---|---|---|
| Material family | Polyurethane sports-flooring material. | Cement-based levelling underlayment. |
| Primary role | Creates a smooth seamless PU layer inside the sports-flooring system. | Corrects or levels a substrate before a separate floor finish is installed. |
| System position | Inside the PU flooring build-up, often above resilient layers and below the top coat. | Below the flooring system as a substrate-preparation material. |
| Finished floor role | Part of the final polyurethane sports-floor structure. | Usually not the final sports surface. |
| Buyer question | Do I need a smooth PU layer in the sports system? | Do I need to correct slab levels before flooring starts? |
Important:
a sports-floor self-leveling PU compound should not be specified to fix major concrete level problems that belong to civil or substrate-preparation work.
Self-leveling compound vs pore sealer
Closing pores and creating a dense PU layer are not the same step
PU Pore Sealer
Used to close the open texture of compatible rubberized or porous resilient layers before dense PU material is applied.
PU Self-Leveling Compound
Forms the smooth dense polyurethane layer that becomes part of the functional body of the sports floor.
System Sequence
Some systems may require both products in sequence; others may use a different approved build-up. Follow the selected Sport Floor system.
Application workflow
Flow and levelling work best when the system below is already correct
Confirm the System
Identify the indoor, cushioned, self-leveling or other approved Sport Floor PU system.
Prepare Lower Layers
Ensure the substrate, primer, cushion or pore-sealed base is ready for the self-leveling material.
Prepare the Product
Follow the current Sport Floor mixing and preparation procedure for the actual supplied material.
Spread the Compound
Apply the material evenly using the approved trowel or project-specific application method.
Allow Flow & De-Aeration
Use the specified technique and application window so the material can form the intended smooth layer.
Apply the Final Finish
Proceed with the compatible top coat and line marking after the self-leveling layer reaches the required condition.
Technical product data
Use the current Sport Floor TDS for the exact product supplied
Self-leveling PU products differ by formulation. Do not copy another manufacturer’s density, viscosity, layer thickness, working time or cure values into a Sport Floor specification.
| Item | Sport Floor PU Self-Leveling Compound | Buyer relevance |
|---|---|---|
| Product Category | Self-leveling polyurethane compound for compatible sports-flooring systems. | Separates it from cementitious substrate levellers. |
| Primary Function | Creates a smooth, seamless PU layer before compatible final finishing coats. | Defines its role inside the system. |
| Raw Materials | German raw materials used within the applicable formulation. | Key Sport Floor product-quality differentiator. |
| Component Type | Confirm on the current Sport Floor TDS. | Controls mixing and application procedure. |
| Viscosity / Flow | Confirm on current Sport Floor TDS. | Relevant to levelling and practical application behavior. |
| Density | Confirm on current Sport Floor TDS. | Used for BOQ, technical submittals and quantity planning. |
| Recommended Thickness | Defined by the selected Sport Floor system and project specification. | Directly affects consumption and system performance. |
| Consumption | Use current Sport Floor product data and actual specified thickness. | Required for accurate material planning. |
| Working / Cure Time | Follow current Sport Floor TDS and actual site conditions. | Controls installation sequence. |
| Following Layer | Compatible Sport Floor top coat and/or line-marking system as specified. | Connects the product to the finished sports floor. |
| Packaging | Confirmed in the current commercial offer. | Needed for pallet and export planning. |
| Storage / Shelf Life | Follow current label and Sport Floor technical documents. | Important for distributors and international shipments. |
Need current documents?
Request the latest TDS, SDS, packing information and quotation at
info@sportfloor-m.com.
Common specification mistakes
A self-leveling layer is only as good as the system beneath it
Using It as Concrete Repair
Major substrate defects should be corrected before the polyurethane sports-flooring system begins.
Skipping Pore Sealing
Where the system requires pore sealing over a rubberized layer, applying dense PU directly may lead to defects or excessive material demand.
Wrong Layer Thickness
Thickness should follow the selected Sport Floor system rather than a generic value copied from another product.
Ignoring Moisture
Self-leveling PU is not a substitute for a dedicated moisture-control solution where the substrate requires one.
Poor Mixing or Application
Incorrect preparation can affect flow, de-aeration and surface uniformity.
Mixing Unchecked Systems
Primer, cushion/base, self-leveling compound and top coat should be verified as compatible components.
Manufacturer + supplier + exporter
Source the self-leveling layer from a manufacturer that supplies the complete PU system
Sport Floor manufactures a wide polyurethane sports-flooring range so contractors, distributors and importers can source the self-leveling compound together with the layers around it.
Sports Flooring Contractors
For seamless PU sports halls, courts and cushioned systems.
Distributors
For companies building a professional polyurethane sports-flooring product range.
Importers
Manufacturer-direct supply with technical and commercial documentation for international orders.
Project Procurement
BOQ-based supply of primer, cushion, self-leveling PU, top coat and line marking.
Request an accurate B2B quotation
Send the system details that determine the correct self-leveling PU quantity
Application
Basketball, volleyball, handball, multi-purpose hall, training floor or another compatible PU sports use.
Total Area
Provide project square metres for commercial planning.
Lower Layer
State whether the self-leveling PU will be installed over cushion, rubberized base, pore sealer or another approved layer.
Required Thickness
Provide the specified system thickness where available.
Selected System
Indoor PU, cushioned PU, self-leveling PU or another compatible Sport Floor build-up.
Final Finish
Tell us which top coat and line-marking route will be used.
Destination
For export, provide country, city and preferred port or delivery point.
Documents
List TDS, SDS or consultant-submittal requirements.
Build the complete seamless PU system
Continue from self-leveling PU to cushion layers, pore sealing, top coats and markings
PU Self-Leveling Compound FAQ
Questions contractors and buyers ask before specification
What is PU Self-Leveling Compound used for?
It is used to create a smooth, seamless polyurethane layer inside compatible sports-flooring systems before the final top coat and sports markings.
Is it the same as cementitious self-leveling underlayment?
No. Cementitious underlayment is used to level a substrate before flooring. PU Self-Leveling Compound is part of the polyurethane sports-flooring system itself.
Can it be used over a cushion layer?
Yes, where the selected Sport Floor system specifies self-leveling PU above a compatible elastic cushion layer.
Can it be used over a rubberized base?
Yes, where the selected system specifies the required pore-sealing or intermediate treatment before the self-leveling compound.
Is it the final top coat?
Not necessarily. In many compatible systems, the self-leveling compound forms the dense PU body and then receives a dedicated functional top coat.
Does Sport Floor manufacture PU Self-Leveling Compound?
Yes. It is part of the Sport Floor polyurethane sports-flooring product range for project use, professional contractors, distribution and export.
Does Sport Floor use German raw materials?
Yes. German raw materials are used within the applicable Sport Floor PU Self-Leveling Compound formulation.
What thickness should be applied?
Use the selected Sport Floor system specification and current product TDS. Do not copy another manufacturer’s thickness.
How much material do I need?
Send the area, system and required layer thickness. Consumption should be calculated from current Sport Floor product data.
Can Sport Floor supply the complete PU system?
Yes. Buyers can request compatible primer, cushion or base layer, pore sealer, self-leveling compound, top coat and line marking as one material package.
Can Sport Floor export the product?
Yes. International contractors, distributors, importers and project buyers can request direct supply at info@sportfloor-m.com.
Can I request TDS and SDS documents?
Yes. Request the current product documents at info@sportfloor-m.com and use the latest issued Sport Floor data for approval and application.
Sport Floor PU manufacturer · German raw materials · global supply
Create the seamless PU body of the sports floor before the final finish is applied.
Send the project application, area, lower layer, required system, self-leveling thickness, final finish and destination. Sport Floor can quote PU Self-Leveling Compound individually or prepare a wider compatible polyurethane sports-flooring material package.