5 cm Artificial Grass for Landscapes and Outdoor Projects
Long-pile 50 mm artificial grass for selected gardens, villas, compounds, hotels, recreational areas and application-specific sports projects. Compare the yarn, density, backing, infill requirements and complete installation system before choosing the product.
What Is 5 cm Artificial Grass?
5 cm artificial grass is synthetic turf with a nominal pile height of approximately 50 mm above the backing. The long pile creates a deep visual profile and may be used in selected landscaping or application-specific sports products.
The 50 mm measurement does not identify the complete product. Landscape turf and football turf can share the same pile height while using different yarns, densities, stitch rates, backing, infill quantities and performance requirements.
A buyer should therefore define the intended application before comparing prices. A decorative garden model should not be treated as equivalent to a football system simply because both products have a 50 mm pile.
Long Pile Profile
Creates a deep and full-looking surface when supported by suitable yarn weight and density.
Different Product Types
50 mm turf may be designed for landscaping or sports, with different constructions for each use.
Infill Coordination
Longer sports turf commonly requires application-specific infill and maintenance planning.
Export Planning
Accurate supply planning requires the total area, roll size, specification, destination and delivery basis.
50 mm Landscape Turf vs 50 mm Sports Turf
Products with the same pile height can serve completely different purposes. The application must be stated clearly in every quotation.
50 mm Landscape Artificial Grass
Landscape products focus on appearance, softness, fiber color, visual density, drainage and suitability for gardens or outdoor leisure areas.
- Private gardens and villas.
- Hotels and residential compounds.
- Outdoor seating and recreational zones.
- Selected rooftops and terraces.
- Decorative commercial landscapes.
50 mm Sports and Football Turf
Sports turf is selected as part of a complete playing system. The yarn, backing, infill, shock pad, base, ball behavior and maintenance requirements must be coordinated.
- Football training fields.
- Community football pitches.
- Schools and sports facilities.
- Application-specific outdoor sports areas.
- Projects with defined system-performance requirements.
Where 5 cm Artificial Grass Can Be Used
The exact offered model must be approved for the selected application, traffic level, base and installation system.
Premium Garden Areas
Selected long-pile landscape models create a full green profile in villas, private gardens and outdoor leisure areas.
Villas and Compounds
Suitable for selected residential landscape zones where a deep appearance and consistent green presentation are required.
Hotels and Leisure Landscapes
Provides a decorative green surface for selected hotels, resorts, recreation areas and outdoor hospitality spaces.
Commercial Landscaping
Can be integrated with gravel, paving, planting areas and decorative elements in selected commercial projects.
Poolside Outdoor Areas
Can be considered near pools when drainage, joints, backing and the supporting surface are suitable for wet conditions.
Application-Specific Sports Fields
Selected 50 mm sports products may be used in football systems when the full turf, infill, base and performance requirements are defined.
What Determines the Quality of 50 mm Artificial Grass?
Long-pile turf requires coordinated yarn, tufting and backing. Increasing the height without sufficient yarn content or density does not automatically create a better product.
- Main yarn: creates the visible blades and primary surface characteristics.
- Yarn shape: influences recovery, light reflection, visual appearance and interaction with infill.
- Dtex and yarn weight: help describe the amount and construction of yarn used.
- Gauge and stitch rate: determine the arrangement and distribution of tufts across the roll.
- Thatch fibers: may be included in landscape products to add visual depth and support.
- Backing: holds the yarn and supports joining, handling and installation stability.
- Drainage: must be coordinated with the supporting base and site levels.
- Infill: may be required for fiber support, ballast or sports-system performance.
Review the 5 cm Artificial Grass Sample Carefully
Inspect the surface, pile profile and backing, and compare the sample with the technical documents for the exact offered product.
Surface Density
Check the distribution of fibers, color variation and how much backing remains visible through the pile.
Yarn and Pile Profile
Review the blade shape, pile length, thatch, visual depth and how the fibers stand and recover.
Backing and Handling
Inspect coating consistency, drainage openings, roll condition, flexibility and the quality of the edges.
5 cm Artificial Grass Specifications to Confirm
The quotation, technical data, approved sample and purchase order should all refer to the same exact product specification.
| Specification | What to Confirm | Why It Matters |
|---|---|---|
| Application | Landscape, recreational area, football field or another defined use. | Determines whether the product requires landscape or sports construction. |
| Pile Height | Confirm a nominal visible yarn height of approximately 50 mm. | Establishes the long-pile category but not the full product quality. |
| Yarn Material | Confirm the polymer and yarn construction of the offered model. | Influences feel, recovery, appearance and application suitability. |
| Yarn Shape | Confirm the blade profile and whether the yarn is monofilament or another construction. | Influences recovery, appearance and interaction with infill. |
| Dtex | Review the declared yarn mass over a specified length. | Supports product comparison when reviewed with density and blade design. |
| Gauge | Confirm the spacing between the tufting rows. | Works with stitch rate to determine fiber arrangement. |
| Stitch Rate | Confirm the number of stitches over the stated roll length. | Contributes to the total density and distribution of the turf. |
| Total Density | Confirm stitches or tufts per square meter. | Influences fiber distribution, appearance and use suitability. |
| Yarn Weight | Confirm the quantity of yarn used per square meter. | Helps distinguish between 50 mm products with different yarn content. |
| Backing | Review primary backing, secondary coating and available tuft-retention data. | Supports roll stability, joining and installation quality. |
| Drainage | Confirm backing perforations and the drainage route through the complete system. | Product openings alone cannot correct an unsuitable base. |
| Infill | Confirm infill material, quantity and installation method where required. | Infill can influence fiber support, ballast and sports performance. |
| Shock Pad | Confirm whether an underlay or shock pad forms part of the system. | May be required for application-specific performance or impact control. |
| Roll Dimensions | Confirm available roll width and length. | Affects seams, waste, packing and shipping. |
| Documentation | Request technical data, safety information, packing details and applicable test reports. | Provides a documented basis for approval and procurement. |
5 cm vs 2 cm, 3 cm and 4 cm Artificial Grass
Longer pile creates a deeper surface profile, but the best product depends on the application, yarn, density and installation system.
Compact Turf
Suitable for selected balconies, displays and decorative areas requiring a low surface profile.
View 2 cm turfBalanced Landscape Turf
Provides a medium garden profile for many residential landscape applications.
View 3 cm turfFull Garden Profile
Creates a fuller landscape appearance with less pile length than 50 mm turf.
View 4 cm turfLong-Pile Turf
Provides the deepest profile in this group and may include separate landscape and sports constructions.
Installing 5 cm Artificial Grass
Installation requirements change according to whether the turf is intended for landscaping or a sports field.
Define the Application
Confirm whether the system is for landscape use, recreation, football or another outdoor application.
Prepare the Base
Create a stable, level and drainable foundation suitable for the intended traffic and complete surface system.
Plan the Rolls
Arrange roll direction, field lines, joints and cutting to minimize waste and visible variation.
Join and Secure
Cut adjoining edges accurately and use system-compatible jointing tape, adhesive and perimeter fixing.
Apply the Required Infill
Spread the specified infill in controlled stages when it forms part of the approved landscape or sports system.
Brush and Inspect
Brush the turf, check infill distribution, inspect seams and confirm drainage and surface uniformity.
Maintaining Long-Pile Artificial Grass
Longer fibers require regular brushing and inspection to help maintain their distribution and prevent debris from settling deeply inside the pile.
- Remove leaves, litter and loose debris regularly.
- Brush the surface with suitable non-metallic equipment.
- Inspect seams, edges and line markings.
- Keep drainage openings and outlets clear.
- Redistribute and replenish infill when required.
- Repair damaged or lifted sections promptly.
- Keep flames, cigarettes and hot equipment away from the surface.
- Use a scheduled maintenance plan for sports fields.
How to Request a 5 cm Artificial Grass Quotation
Accurate pricing requires the application, complete technical specification, quantity, system materials and delivery destination.
State the Application
Confirm whether the enquiry is for landscaping, football, recreation or another outdoor project.
Provide the Area
Send the total square meters and drawings or dimensions for roll and cutting-plan calculations.
Confirm the Specification
Provide the yarn, dtex, gauge, density, backing and roll dimensions when already defined.
List System Materials
State whether the enquiry includes adhesive, joint tape, infill, shock pad, line materials or installation accessories.
Request the Documents
Identify any technical data, test reports, packing documents or project-specific approvals required.
Provide the Destination
Include the destination country, city or port and the preferred delivery basis, such as EXW, FOB or CIF.
Confirm Sports Performance and International Delivery Requirements
Continue Planning Your Artificial Grass Project
5 cm Artificial Grass FAQ
What does 5 cm artificial grass mean?
It refers to artificial grass with a nominal pile height of approximately 50 mm above the backing. The complete product also includes yarn, density, gauge, stitch rate, backing and other specifications.
Is 5 cm artificial grass suitable for gardens?
Selected 50 mm landscape products can be used in gardens when their yarn, density, backing, drainage and maintenance requirements match the project.
Is all 5 cm artificial grass suitable for football?
No. A landscape product and football turf may have the same pile height but use different yarns, backing, infill and performance specifications.
Is 5 cm artificial grass better than 4 cm?
5 cm provides a longer pile, while 4 cm may be easier to maintain in many landscape projects. The better option depends on the complete product construction and intended use.
Does 50 mm artificial grass require infill?
Infill requirements depend on the product and application. Sports systems commonly use specified infill, while landscape products may use silica sand or another quantity defined by the manufacturer.
Can 5 cm artificial grass be installed over concrete?
Selected landscape products can be installed over stable and suitably drained concrete. Sports fields require a dedicated base and complete system design.
Can 5 cm artificial grass be installed over soil?
It should be installed over a prepared, stable and drainable base rather than loose untreated soil.
Can 5 cm artificial grass be used in playgrounds?
Artificial turf may be part of a playground surface, but turf height alone does not provide verified fall-impact protection. A suitable tested shock-absorbing system may be required.
Does 5 cm artificial grass require maintenance?
Yes. Long-pile turf requires debris removal, brushing, seam and edge inspection, drainage checks and infill maintenance where applicable.
How should I compare 5 cm artificial grass prices?
Compare offers using the same application, yarn, dtex, gauge, density, backing, yarn weight, roll size, infill, accessories, quantity and delivery basis.
What information is required for a quotation?
Provide the application, total square meters, required specification, drawings, system materials, destination and preferred delivery term.
